Tencent Cloud OpenClaw Complete Guide to Accessing QQ Bots: From 0 to Chattable

If you have already deployed OpenClaw on a cloud server, the overall process of connecting to QQ is actually not complicated: first, go to the QQ Open Platform to create a QQ bot and obtain AppID 和 AppSecretThen return to the management panel on the cloud OpenClaw to complete the model configuration and channel configuration, and finally verify in QQ whether the bot can reply normally. Tencent Cloud's access method uses a visual panel, so you don't need to run native commands additionally.

Say Goodbye to Cumbersome Configuration: A One-Click Deployment Guide for OpenClaw on Tencent Cloud

This paper focuses on the steps to deploy OpenClaw on Tencent Cloud with one click through newly purchased or existing servers, including server configuration choices and model API settings, with the aim of helping users to quickly build a stable and isolated resident AI assistant service.

1. Get these things ready before you start.

Before proceeding with the formal operation, first confirm that you meet the following conditions:

1. Have a QQ account that has completed real-name verification.
2. OpenClaw has already been deployed in the Lighthouse lightweight application server.
3. If your OpenClaw instance was created with an older version, it's best to update to a newer app version before proceeding with the configuration.
4. If you plan to use the QQ channel long-term, prioritize domestic servers and model services that can be stably accessed.

2. Register and log in to the QQ Open Platform

pre-entry QQ Open PlatformIf you have not registered before, the platform will automatically complete the registration for you and bind your current QQ account to the open platform. If you have not registered before, after scanning the code and authorisation, the platform will automatically help you complete the registration and bind your current QQ account to the open platform. After that, you will enter the management page of the QQ robot.

3. Create your QQ bot

After entering the QQ bot page, click “Create Bot” and follow the prompts to set up a new bot. Once created, the system will generate two crucial parameters:

• AppID
• AppSecret

Copy and save these two values immediately; they will be required later when configuring OpenClaw. Pay special attention here,AppSecret For security reasons, it is usually not displayed in plain text for an extended period, and you may need to reset it when viewing it later, so be sure to save it properly when it first appears.

After creation, you should generally see this bot appear in the message list within the QQ client. However, at this point, it usually cannot function properly because it has only been “set up” and hasn't yet connected to your OpenClaw instance. As mentioned in the original text, if cloud configuration hasn't been completed, you might see prompts like “This bot has gone to Mars, try again later” when chatting with it.

4. Enter the OpenClaw management page

Next, return to the Tencent Cloud console, locate the Lighthouse instance where you deployed OpenClaw, enter the instance details, and then go to the “Application Management” page. The subsequent model settings and QQ channel configurations will be completed here.

5. First, configure the model

QQ is merely the entry point for messages to come in and go out; what truly handles understanding and replying to content is the model you configured for OpenClaw. Therefore, before connecting QQ, first ensure that the model API Key has been correctly filled in and that the model itself can be called normally.

This is very important because many people think that “QQ not responding” is due to a poorly configured channel, but in reality, one of the more common reasons is that the model is not properly configured, the key is entered incorrectly, or the model service itself is unavailable. The original text also specifically reminded that model configuration is a necessary step.View model hot model registration address。

6. Configure the QQ channel

After confirming the model is fine, proceed with channel configuration.

Find it in the “Application Management” page Channel Configure the region, add a QQ channel, then save what you just did AppID 和 AppSecret Fill it in, save and apply the configuration. Once the system processing is complete and the page shows a successful save, it means the QQ channel has been officially integrated into OpenClaw.

If you fill in the parameters incorrectly at this step, the most typical phenomenon is that when you return to QQ, the bot still cannot respond normally or continues to indicate an abnormal status. Therefore, if it fails, the first thing to check is whether these two values were copied incorrectly, omitted, or if an old Secret was entered.

7. Go back to QQ to test if the connection is successful

After completing the model configuration and QQ channel setup, you can return to the mobile QQ or desktop QQ and directly send messages to the bot for testing. As long as it can understand and respond normally like an AI assistant, it means the entire link has been successfully established.

There's a detail to note here: It's not recommended to directly add this QQ bot into group chats for interaction. At least in the current scenario, prioritizing testing and usage through private chats would be more prudent.

8. What can you do after successful connection

After connecting to QQ, the bot isn't just capable of sending and receiving plain text. The original text also mentions that its capabilities include:

• Receive text
• Receive images
• Receive files
• Reply text
• Reply image
• Markdown format reply
• Actively send message
• Voice message
• Reply file

However, “historical message quoting” is currently not supported.

Another crucial reminder is: QQ is merely a channel; whether it can truly recognize images, generate images, or process files still depends on the capabilities of the underlying model behind it.

For example, if you want the robot to see images, you need to configure OpenClaw with a model that supports visual understanding; if you want it to generate images, you need to connect it to a model that supports image generation.

9. The two most common types of problems

9.1. Robot prompt abnormal, unable to converse.

If the robot replies something like “Gone to Mars, try again later,” first check the following two items:

• Did you not fill in the QQ bot in OpenClaw at all? AppID 和 AppSecret
• Is incorrect information entered AppID 或 AppSecret

9.2. Looks like it's connected, but the robot just won't reply

This situation is usually not an issue with the QQ channel itself, but rather an abnormality in the model configuration. For example, an improperly configured API key, an unavailable model, or a failed model call can all cause the bot to receive messages but be unable to respond. The solution is to return to the model configuration page of OpenClaw and recheck the model connection status.

10. Summary

Connecting OpenClaw to QQ, the core is just four steps:

1. Deploy OpenClaw
2. Create a robot on the QQ Open Platform
3. Save it AppID 和 AppSecret
4. Complete model configuration and QQ channel configuration in the cloud panel

As long as these four steps are done correctly, you can basically turn the QQ bot into your OpenClaw conversation gateway. From there, whether it's for personal assistance, file processing, image-text Q&A, or scheduled reminders, it's all about expanding on this foundation.